J & G Machinery
  1. cart [ empty ]
  2. Contact Us
  3. Sell to J & G
  4. home
  1. about
  2. categories
  3. brands
  4. service
  5. parts & tooling
  6. quick ship list


  • stock number
  • new/used
  • year
  • fob
    Sanford, NC
  • electrical
    230V, 3 Ph, 60 Cy
  • condition


Have questions?
Prefer to discuss
by phone or email?
We're here to help!

P: 919-776-8341


Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 8 mm.
The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy.
All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings.
  • 0.4 to 6 mm Edgebanding thickness capacity
  • 3 mm Guillotine capacity
  • 3/8" to 2-1/2" Panel thickness capacity
  • 5-1/2" Minimum panel length
  • 2-3/8" Minumum Panel width
  • 20" Minimum distance between panels
  • Feed speed: 36 FPM
  • "Touch 7" Controller with 7" touchscreen capable of storing up to 60 programs
  • Quick change/disconnect glue pot
  • Automatic strip feed magazine
  • Pre-milling station with (2) 2 HP high frequency motors with jumping action controlled through the PLC
  • 3-Roll pressure section (1 large driven roller, 2 idle rollers)
  • (2) 0.25 HP motors for end trim with pneumatic tilt
  • (2) 0.7 HP motors for top and bottom trim with 3-position pneumatics to go from thin PVC, to 3mm, to solid wood - ALL through the controller
  • Profile scraping station with pneumatic positioning
  • Glue scraping station with pneumatic positioning
  • (2) 0.25 HP top and bottom buffing, tiltable 0 to 15 degrees
  • Acoustical safety enclosure
  • Air requirements: 90 PSI
  • Dust Extraction: Machine comes with two 3" ports for the premilling station, two 2" ports for the top and bottom trim station and one 3" port for the 3mm collection bin for extraction.  Recommend dust collector with a 2,500 CFM rating.  
  • Weight:  3,200 lbs.
  • Electrical: 44 Amps on 230V 3-Phase

Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.

Member WMIA UWME Member

Connect with us

J & G Machinery on Facebook J & G Machinery on Twitter J & G Machinery on YouTube

© Copyright 2008–2021 J&G Machinery, Inc. All Rights Reserved
Terms and Conditions