SCM OLIMPIC K 360 TE EDGEBANDER


Stock Number:
K360TE

Condition:
NEW

Electrical:
230V, 3 Ph, 60 Cy

FOB:
Sanford, NC

MSRP:
~$0

Our Price:
$0

Freight Charges Not Included

Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 8 mm.
 
MACHINE BASE:
The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy.
 
TOP PRESSURE BEAM:
All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings.
 
PRIMARY SPECIFICATIONS:
  • 0.4 to 6 mm Edgebanding thickness capacity
  • 3 mm Guillotine capacity
  • 3/8" to 2-1/2" Panel thickness capacity
  • 5-1/2" Minimum panel length
  • 2-3/8" Minumum Panel width
  • 20" Minimum distance between panels
  • Feed speed: 36 FPM
 
MAJOR FEATURES:
  • The K360TE comes equipped with the Startouch controller.  This controller features a 12" touch screen display. Capable of storing 60 programs. Color graphic display of all the working units. Tracks production information, diagnostic information and monitors maintenance schedules. Choose mm's or inches, as well as 5 different languages. Swivels 270 degrees and tilts for easy access.
  • SGP-E Glue Pot - Quick heat up time due to the small glue pot. Reverse rotation of the glue roller for the application of solid wood. Double Thermo Regulation for easy use of both EVA and PUR glue. Color change and glue pot cleaning are able to be completed in minutes, as opposed to hours.
  • Automatic strip feed magazine
  • Pre-milling station with (2) 2 HP high frequency motors with jumping action controlled through the PLC
  • 3-Roll pressure section (1 large driven roller, 2 idle rollers)
  • (2) 0.25 HP motors for end trim with pneumatic tilt
  • (2) 0.7 HP motors for top and bottom trim with 3-position pneumatics to go from thin PVC, to 3mm, to solid wood - ALL through the controller
  • Profile scraping station with pneumatic positioning
  • Glue scraping station with pneumatic positioning
  • (2) 0.25 HP top and bottom buffing, tiltable 0 to 15 degrees
  • Acoustical safety enclosure
  • Air requirements: 90 PSI
  • Dust Extraction: Machine comes with two 3" ports for the premilling station, two 2" ports for the top and bottom trim station and one 3" port for the 3mm collection bin for extraction.  Recommend dust collector with a 2,500 CFM rating.  
  • Weight:  3,200 lbs.
  • Electrical: 44 Amps on 230V 3-Phase