Description

• Easy to use HMI driven pendulum table sanding machine center for mdf and solid wood doors
• Machine uses 2 servo motors for the X and Y axes
• X-axis moves from left to right across the two tables, Y-axis move from front to back
• Z-axis is controlled by a pneumatic servo valve that uses a load-cell to obtain pressure feedback and maintain the commanded pressure on the working surface
• Equipped with a vacuum system on both tables to hold the doors in place while sanding
• 4 laser measurement devices attached to the side of the machine automatically measures any door that is put on either table
• An air knife is attached to the middle, back of the machine to clean off the sander pad in between cycles and when programmed
• Machine comes with an area safety scanner attached to the lower, front portion of the machine
• Scanner prevents the users from entering an area in front of a table that is currently being sanded on while allowing them to load or unload a door from the table that is not being used
• Touch Screen control with easy-to-use custom interface, software designed for cabinet doors allow the operator to work on parametric mode
• Minimum part sizes: 8" x 6"
• Maximum part sizes: 60" x 28"
• Abrasive paper size: 3" x 4"
• Overall Machine dimensions: 155" x 61" x 83"
• Total installed power: 10 HP
• Compressed air requirements: 6 bar (88 psi)
• Dust requirements: 350 CFM (4" outlet)
• Power requirements: 230 Volt 3-Phase (Voltage must be within 10% of rated value)

Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.