Description

• Edgebands shaped concave, convex and straight panels 10 to 60 mm thickness
• Efficient design using latest engineering and manufacturing techniques
• Heavy duty frame construction
• Large heavy duty movable vacuum pod arm for ease of operation (Maximum panel weight is 175 lbs.)
• State-of-the-art electronic control system and High Frequency motors
• Laser measurement to help insure constant tight splice-joints on closed panels
• Designed to apply hot melt EVA Adhesive and edgebanding (Note: 0.5 to 3 mm edgeband thickness)
• Trimming unit will facilitate trimming of the top and bottom overhang of the edgebanding

• Glue and tape application on big and small shaped panels
• Equipped with glue pot with 1 Kg capacity
• INCLUDES glue storage hopper for larger adhesive volume with timed sequence selection for replenishing reservoir
• (2) Rollers to copy the shape of the piece
• Glue application amount is adjusted via a knob
• Automatic guillotine for coiled material up to 3 mm x 45 mm
• PLC to set the length and the cut of the tape (by means of an encoder) for open and closed pieces.
• Laser for easy programming of the cut for closed pieces with no need of measuring the piece
• On/Off automatic feeder of the panel
• Raisable working table for small panels
• Utilizes (2) 800 Watt heating elements with electronic temperature control via thermo-regulator
• Trimming station with pneumatic tilting, to allow edgebanding of big pieces
• Trimming unit with (2) 0.5 Kw 15000 RPM high frequency motors with up/down and front copiers and pneumatic cylinder to lift the motors approaching the pieces to be trimmed
• Front copier external adjustment of the trimming unit
• (2) Brazed cutters
• Raisable working table for small panels
• Reinforced arm with vacuum table to hold large panels  

• Edge Coil Thickness: 0.5 mm to 3 mm (0.5 or thicker thin tape ONLY with proper Low Temp Adhesive)
• Work piece min: 200 mm dia.
• Work piece max: 2400 mm dia.
• Work piece Thickness: 10 to 60 mm (Note: Max. is 45 mm with 3 mm edgebanding - Min. 12 mm for trim station clearance)
• Edgeband Thickness: 0.5 mm/.020" to 1 mm for panels up to 60mm thick, 2 mm for panels up to 60 mm thick, 3 mm for panels up to 45 mm thick
• Minimum Outside Radius: 30 mm (Note: Based on quality/type of edge tape)
• Minimum Inside Radius: 250 mm
• Feed (Rotation) Speed: 5 m/min
• Dust extraction port: 1 port at 80mm for Trimming unit
• Air Requirement: 6 bar (90 psi)
• Machine Dimensions: 83" x 62" x 62"H
• Machine weight: Approx 1,500 lbs.

Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.