By Stock Number
By Category
- Air Compressors
- Borers - 32mm
- Borers - Horizontal
- Borers - Point-to-Point
- Borers - Vertical
- Carvers
- Clamp Carriers
- Clamps - Case
- Clamps - Door/Drwr
- Clamps - Frame/Misc
- Door Machines
- Dovetailers
- Dowel Inserters
- Dowel Makers & Cutters
- Dust Collectors
- Edgebanders
- Finger Jointers
- Finishing Equipment
- Glue Equipment
- Gluers - Radio Frequency
- Grinding & Sharpening
- Haunching Machines
- Jointers
- Laminate - Trimrs/Slitrs
- Laminate - Wrap/Roll/Foil
- Lathes
- Louver Groovers
- Mat. Handlng - Conveyors
- Mat. Handlng - Lifts
- Metal Working
- Miscellaneous
- Mortisers
- Moulders
- Nail/Fastening Mach
- Pallet Equipment
- Panel Cleaners
- Planers - Double
- Planers - Single
- Postform Equipment
- Presses
- Routers - CNC
- Routers - Pin/Inverted
- Sanders - Profile/Mldg
- Sanders - Spdl/Disc/Misc
- Sanders - Stroke/Edge
- Sanders - Stroke/Edge
- Sanders - Wide Belt
- Sawmill Equipment
- Saws - Bandsaw/Resaw
- Saws - Cut-off & Miter
- Saws - Gang Rip
- Saws - Optimizing
- Saws - Panel
- Saws - Radial Arm
- Saws - Sliding Table
- Saws - Straight Line Rip
- Saws - Table
- Saws - Vertical Panel
- Shapers - Arch Moulding
- Shapers - Auto/Prof/Misc
- Shapers - Shape & Sand
- Shapers - Single/Double
- Stair Equipment
- Tenoners - Double End
- Tenoners - Single End
- Trim & Bore/Chuck
- Truss Equipment
- Vee-Grooving Equipment
- Veneer Equipment
- Wood Grinders & Hogs
By Manufacturer
- Aaeco
- Accu-systems
- Air Craftsmen
- Altendorf
- Bacci
- Baker
- Belfab
- Bell
- Biesse
- Black Brothers
- Brevetti
- C.r. Onsrud
- Cameron Automation
- Casolin
- Castle
- Cehisa
- Cemco
- Chrisco
- Comil
- Comp-air
- Crouch
- Ctd
- Dantherm Filtration
- Denray
- Detel
- Diehl
- Disa
- Dodds
- Doucet
- Dust Technology
- Dustek
- Euromec
- Gorbel
- Grecon Dimter
- Greenlee
- Griggio
- Gruber
- Hammond
- Holz-her
- Holzma
- Industrial
- Ingersoll Rand
- Invicta
- Island Clean Air
- J & P Machines
- Jacksonville Blowpipe Co
- Jet
- Jlt
- Josting
- Kreg
- L & L Machinery
- Lancaster
- Larick
- Lobo
- Maggi
- Mereen-johnson
- Mini Max
- Nandina
- Newman/whitney
- Northfield
- Northtech
- Oakley
- Ogam
- Omga
- Onsrud
- Pinheiro
- Pistorius
- Powermatic
- Progress
- Raimann
- Rfs
- Ritter
- Root
- Rosenquist
- Ryburn Pickles
- Sac
- Safety Speed Cut
- Sawstop
- Scmi
- Selco
- Shaw Almex
- Shoda
- Sorbini
- Southworth
- Steff
- Striebig
- Sullivan Palatek
- Taylor
- Tigerstop
- Timesavers
- Torit Donaldson
- Unique
- Unknown
- Virutex
- Vitap
- Wadkin
- Weeke
- Weima
- Weinig
- Whirlwind
- Wysong & Miles
- Z-laser
New Machinery
Can't Find It?
Can't find what you are looking for?
Let our professionals help you make a smart decision while removing the risks of purchasing used machinery on the Internet.
Contact Us »
Category : Shapers - Single/Double
NEW SCMI TF 130 CLASS SHAPER
9 HP motor; 47.2" x 28.7" table dimensions; 36" table height; 1-1/4 interchangeable spindle; 5.5" working height of spindle (under the nut); mechanical readout of spindle height; No. 5 Morse Taper spindle mount; 250 mm (9.8") max. tooling diameter; spindle speeds of 3,000, 4,500, 6,000, 8,000 and 10,000 RPM; reverse switch for spindle rotation; 5 table insert rings; 320 mm (12.6") max. insert opening; miter gauge and gauge T-slot in table; foot pedal controls for mechanical brake and spindle lock; magnetic starter with overload protection; mechanical readouts with handcrank on both infeed and outfeed fences; adjustable fence and guard assembly; 4.72" dia. dust outlet on fence and rear base. Dust extraction requirements: 680 CFM X 2; Electrical requirements: 29amps @ 230V 3-Phase; Machine weight: 1,100 lbs.
NEW INVICTA TI-14 V.05 TILT SPINDLE SLIDING TABLE SHAPER
7-1/2 HP 3-phase motor; 35-7/16" x 43-3/16" fixed table; 10-13/16" x 43-3/16" sliding table; spindle tilts 5° to 45°; spindle stroke 5-1/2"; 1-1/4" diameter spindle; 5-5/16" capacity under the nut; (4) spindle speeds of 3,000, 4,500, 6,000, and 10,000 RPM; 16-17/32" maximum table insert diameter. Includes: Spindle reversing switch, brake, micro adjustable fence, thermal overload protection, dust hood and miter gauge. Machine shipping weight is 1,612 lbs.
NEW INVICTA TI-14 V.05 TILT SPINDLE SLIDING TABLE SHAPER
7-1/2 HP 3-phase motor; 35-7/16" x 43-3/16" fixed table; 10-13/16" x 43-3/16" sliding table; spindle tilts 5° to 45°; spindle stroke 5-1/2"; 1-1/4" diameter spindle; 5-5/16" capacity under the nut; (4) spindle speeds of 3,000, 4,500, 6,000, and 10,000 RPM; 16-17/32" maximum table insert diameter. Includes: Spindle reversing switch, brake, micro adjustable fence, thermal overload protection, dust hood and miter gauge. Machine shipping weight is 1,612 lbs.
NEW INVICTA TI-14 V.04 SLIDING TABLE SHAPER
7-1/2 HP 3-phase motor; cast iron frame; 25-1/4" x 43-3/8" CNC precision ground cast iron fixed table; 10-7/8" x 43-1/4" sliding table; coping table with manual eccentric hold-down clamp and 58" long fence with flip-over stop; spindle stroke 5-1/2"; 1-1/4" diameter spindle with 5-5/16" capacity under the nut; (4) spindle speeds of 3000, 6,000, 8,000 and 10,000 RPM; 13-3/4" maximum table insert diameter; (2) 4-3/4" dust outlets. Includes: Spindle reversing switch, safety brake, micro adjustable fence, magnetic starter with overload protection, dust hood, aluminum fence plates and miter gauge. Machine shipping weight is 1,575 lbs.
NEW INVICTA TI-14 V.04 SLIDING TABLE SHAPER
7-1/2 HP 3-phase motor; cast iron frame; 25-1/4" x 43-3/8" CNC precision ground cast iron fixed table; 10-7/8" x 43-1/4" sliding table; coping table with manual eccentric hold-down clamp and 58" long fence with flip-over stop; spindle stroke 5-1/2"; 1-1/4" diameter spindle with 5-5/16" capacity under the nut; (4) spindle speeds of 3000, 6,000, 8,000 and 10,000 RPM; 13-3/4" maximum table insert diameter; (2) 4-3/4" dust outlets. Includes: Spindle reversing switch, safety brake, micro adjustable fence, magnetic starter with overload protection, dust hood, aluminum fence plates and miter gauge. Machine shipping weight is 1,575 lbs.
NEW INVICTA TI-14 V.04 SLIDING TABLE SHAPER
7-1/2 HP 3-phase motor; cast iron frame; 25-1/4" x 43-3/8" CNC precision ground cast iron fixed table; 10-7/8" x 43-1/4" sliding table; coping table with manual eccentric hold-down clamp and 58" long fence with flip-over stop; spindle stroke 5-1/2"; 1-1/4" diameter spindle with 5-5/16" capacity under the nut; (4) spindle speeds of 3000, 6,000, 8,000 and 10,000 RPM; 13-3/4" maximum table insert diameter; (2) 4-3/4" dust outlets. Includes: Spindle reversing switch, safety brake, micro adjustable fence, magnetic starter with overload protection, dust hood, aluminum fence plates and miter gauge. Machine shipping weight is 1,575 lbs.
NEW INVICTA TI-14 V.04 SLIDING TABLE SHAPER
7-1/2 HP 3-phase motor; cast iron frame; 25-1/4" x 43-3/8" CNC precision ground cast iron fixed table; 10-7/8" x 43-1/4" sliding table; coping table with manual eccentric hold-down clamp and 58" long fence with flip-over stop; spindle stroke 5-1/2"; 1-1/4" diameter spindle with 5-5/16" capacity under the nut; (4) spindle speeds of 3000, 6,000, 8,000 and 10,000 RPM; 13-3/4" maximum table insert diameter; (2) 4-3/4" dust outlets. Includes: Spindle reversing switch, safety brake, micro adjustable fence, magnetic starter with overload protection, dust hood, aluminum fence plates and miter gauge. Machine shipping weight is 1,575 lbs.
NEW INVICTA TI-14 V.02 SINGLE SPINDLE SHAPER
7-1/2 HP 3-phase motor; cast iron frame; CNC precision ground cast iron table; 35-1/4" x 43-3/16" fixed table; spindle stroke 5-1/2"; 1-1/4" diameter spindle with 5-5/16" capacity under the nut; (4) spindle speeds of 3,000, 6,000, 8,000 and 10,000 RPM; 13-3/4" maximum table insert diameter; (2) 4-3/4" dust outlets. Includes spindle reversing switch, brake, microadjustable fence, thermal overload protection, dust hood, aluminum fence plates and miter gauge. Machine shipping weight is 1,494 lbs.
NEW INVICTA TI-14 V.02 SINGLE SPINDLE SHAPER
7-1/2 HP 3-phase motor; cast iron frame; CNC precision ground cast iron table; 35-1/4” x 43-3/16” fixed table; spindle stroke 5-1/2”; 1-1/4” diameter spindle with 5-5/16” capacity under the nut; (4) spindle speeds of 3,000, 6,000, 8,000 and 10,000 RPM; 13-3/4” maximum table insert diameter; (2) 4-3/4” dust outlets. Includes spindle reversing switch, brake, microadjustable fence, thermal overload protection, dust hood, aluminum fence plates and miter gauge. Machine shipping weight is 1,494 lbs.
NEW INVICTA TI-14 V.02 SINGLE SPINDLE SHAPER
7-1/2 HP 3-phase motor; cast iron frame; CNC precision ground cast iron table; 35-1/4" x 43-3/16" fixed table; spindle stroke 5-1/2"; 1-1/4" diameter spindle with 5-5/16" capacity under the nut; (4) spindle speeds of 3,000, 6,000, 8,000 and 10,000 RPM; 13-3/4" maximum table insert diameter; (2) 4-3/4" dust outlets. Includes spindle reversing switch, brake, microadjustable fence, thermal overload protection, dust hood, aluminum fence plates and miter gauge. Machine shipping weight is 1,494 lbs.
NEW INVICTA TI-14 V.02 SINGLE SPINDLE SHAPER
7-1/2 HP 3-phase motor; cast iron frame; CNC precision ground cast iron table; 35-1/4" x 43-3/16" fixed table; spindle stroke 5-1/2"; 1-1/4" diameter spindle with 5-5/16" capacity under the nut; (4) spindle speeds of 3,000, 6,000, 8,000 and 10,000 RPM; 13-3/4" maximum table insert diameter; (2) 4-3/4" dust outlets. Includes spindle reversing switch, brake, microadjustable fence, thermal overload protection, dust hood, aluminum fence plates and miter gauge. Machine shipping weight is 1,494 lbs.
NEW INVICTA TI-14 V.02 SINGLE SPINDLE SHAPER
7-1/2 HP 3-phase motor; cast iron frame; CNC precision ground cast iron table; 35-1/4" x 43-3/16" fixed table; spindle stroke 5-1/2"; 1-1/4" diameter spindle with 5-5/16" capacity under the nut; (4) spindle speeds of 3,000, 6,000, 8,000 and 10,000 RPM; 13-3/4" maximum table insert diameter; (2) 4-3/4" dust outlets. Includes spindle reversing switch, brake, microadjustable fence, thermal overload protection, dust hood, aluminum fence plates and miter gauge. Machine shipping weight is 1,494 lbs.
NEW INVICTA TI-14 V.02 SINGLE SPINDLE SHAPER
7-1/2 HP 3-phase motor; cast iron frame; CNC precision ground cast iron table; 35-1/4" x 43-3/16" fixed table; spindle stroke 5-1/2"; 1-1/4" diameter spindle with 5-5/16" capacity under the nut; (4) spindle speeds of 3,000, 6,000, 8,000 and 10,000 RPM; 13-3/4" maximum table insert diameter; (2) 4-3/4" dust outlets. Includes spindle reversing switch, brake, microadjustable fence, thermal overload protection, dust hood, aluminum fence plates and miter gauge. Machine shipping weight is 1,494 lbs.
NEW INVICTA TI-14 V.02 SINGLE SPINDLE SHAPER
7-1/2 HP 3-phase motor; cast iron frame; CNC precision ground cast iron table; 35-1/4" x 43-3/16" fixed table; spindle stroke 5-1/2"; 1-1/4" diameter spindle with 5-5/16" capacity under the nut; (4) spindle speeds of 3,000, 6,000, 8,000 and 10,000 RPM; 13-3/4" maximum table insert diameter; (2) 4-3/4" dust outlets. Includes spindle reversing switch, brake, microadjustable fence, thermal overload protection, dust hood, aluminum fence plates and miter gauge. Machine shipping weight is 1,494 lbs.
POWERMATIC 28 SHAPER
7-1/2 HP motor; 1-1/4" dia. spindle; 6" capacity under the nut; 4-1/2" spindle travel; 29" x 40" table; Accu-fence; AC inverter drive provides automatic spindle braking and variable speeds ranging from 3,300 to 9,500 RPM; spindle table openings 2-1/2", 4", 6" and 8"; largest diameter cutter - 8". Includes: Miter slot in table and (2) 4" dust outlets. Machine weight - 699 lbs.
RITTER R-10 SHAPER
5 HP motor, belt driven to spindle; 6,100 and 8,600 RPM spindle speeds; 1-1/4" dia. spindle; approx. 3-1/2" capacity under the nut; 36" x 30" table; 5-1/2" maximum cutter diameter; reversing switch; 3/4" wide x 3/8" deep slot in table; magnetic starter with overload protection. Includes: Powermatic 3-roll 4-speed power feeder. Machine weight: 782 lbs.
NORTHTECH NT-525-73-1 SHAPER
7-1/2 HP motor, belt driven to spindle; 3,000, 4,500, 6,000, & 10,000 RPM spindle speeds; 1" dia. interchangeable spindle with MK5 taper; 3-3/4" capacity under the nut; 35" x 27" table; 5" vertical spindle adjustment; (2) table insert rings; max. insert opening - 8-5/8"; micro-adjustable fence/guard assembly. Complete with: Spindle lock, reversing switch, miter gauge slot in table, and magnetic starter with overload protection. Weight: 695 lbs.
NORTHTECH NT-101-73-XLT SHAPER
7-1/2 HP motor, belt driven to spindle; 7,500, & 10,000 RPM spindle speeds; 1-1/4" dia. solid spindle; 5" capacity under the nut; 36" x 38" table; 2-3/4" vertical spindle adjustment; (2) table insert rings - 6-3/8" and 8-5/8"; micro-adjustable fence/guard assembly with dust hood. Complete with: Reversing switch, miter gauge slot in table, and magnetic starter with overload protection. Weight: 704 lbs.
NORTHTECH NT-101-73-XLT SHAPER
7-1/2 HP motor, belt driven to spindle; 7,500, & 10,000 RPM spindle speeds; 1-1/4" dia. solid spindle; 5" capacity under the nut; 36" x 38" table; 2-3/4" vertical spindle adjustment; (2) table insert rings - 6-3/8" and 8-5/8"; micro-adjustable fence/guard assembly with dust hood. Complete with: Reversing switch, miter gauge slot in table, and magnetic starter with overload protection. Weight: 704 lbs.
