By Stock Number
By Category
- Air Compressors
- Borers - 32mm
- Borers - Horizontal
- Borers - Point-to-Point
- Borers - Vertical
- Carvers
- Clamp Carriers
- Clamps - Case
- Clamps - Door/Drwr
- Clamps - Frame/Misc
- Door Machines
- Dovetailers
- Dowel Inserters
- Dowel Makers & Cutters
- Dust Collectors
- Edgebanders
- Finger Jointers
- Finishing Equipment
- Glue Equipment
- Gluers - Radio Frequency
- Grinding & Sharpening
- Haunching Machines
- Jointers
- Laminate - Trimrs/Slitrs
- Laminate - Wrap/Roll/Foil
- Lathes
- Louver Groovers
- Mat. Handlng - Conveyors
- Mat. Handlng - Lifts
- Metal Working
- Miscellaneous
- Mortisers
- Moulders
- Nail/Fastening Mach
- Pallet Equipment
- Panel Cleaners
- Planers - Double
- Planers - Single
- Postform Equipment
- Presses
- Routers - CNC
- Routers - Pin/Inverted
- Sanders - Profile/Mldg
- Sanders - Spdl/Disc/Misc
- Sanders - Stroke/Edge
- Sanders - Stroke/Edge
- Sanders - Wide Belt
- Sawmill Equipment
- Saws - Bandsaw/Resaw
- Saws - Cut-off & Miter
- Saws - Gang Rip
- Saws - Optimizing
- Saws - Panel
- Saws - Radial Arm
- Saws - Sliding Table
- Saws - Straight Line Rip
- Saws - Table
- Saws - Vertical Panel
- Shapers - Arch Moulding
- Shapers - Auto/Prof/Misc
- Shapers - Shape & Sand
- Shapers - Single/Double
- Stair Equipment
- Tenoners - Double End
- Tenoners - Single End
- Trim & Bore/Chuck
- Truss Equipment
- Vee-Grooving Equipment
- Veneer Equipment
- Wood Grinders & Hogs
By Manufacturer
- Aaeco
- Accu-systems
- Air Craftsmen
- Altendorf
- Bacci
- Baker
- Belfab
- Bell
- Biesse
- Black Brothers
- Brevetti
- C.r. Onsrud
- Cameron Automation
- Casolin
- Cehisa
- Cemco
- Chrisco
- Comil
- Comp-air
- Crouch
- Ctd
- Dantherm Filtration
- Denray
- Detel
- Diehl
- Disa
- Dodds
- Doucet
- Dust Technology
- Dustek
- Euromec
- Gorbel
- Grecon Dimter
- Greenlee
- Griggio
- Gruber
- Hammond
- Holz-her
- Holzma
- Industrial
- Ingersoll Rand
- Invicta
- Island Clean Air
- J & P Machines
- Jacksonville Blowpipe Co
- Jet
- Jlt
- Josting
- Kreg
- L & L Machinery
- Lancaster
- Larick
- Lobo
- Maggi
- Mereen-johnson
- Mini Max
- Nandina
- Newman/whitney
- Northfield
- Northtech
- Oakley
- Ogam
- Omga
- Onsrud
- Pinheiro
- Pistorius
- Powermatic
- Progress
- Raimann
- Rfs
- Ritter
- Root
- Rosenquist
- Ryburn Pickles
- Sac
- Safety Speed Cut
- Sawstop
- Scmi
- Selco
- Shaw Almex
- Shoda
- Sorbini
- Southworth
- Steff
- Striebig
- Sullivan Palatek
- Taylor
- Tigerstop
- Timesavers
- Torit Donaldson
- Unique
- Unknown
- Virutex
- Vitap
- Wadkin
- Weeke
- Weima
- Weinig
- Whirlwind
- Wysong & Miles
- Z-laser
New Machinery
Can't Find It?
Can't find what you are looking for?
Let our professionals help you make a smart decision while removing the risks of purchasing used machinery on the Internet.
Contact Us »
Category : Sanders - Wide Belt
NEW SCMI SANDYA 3/S RCS WIDE BELT SANDER
2-head 43" wide capacity; 1st head: 120 mm (5.5") dia. steel calibrating drum with 30 HP motor shared; 2nd head: Combination 120 mm (5.5") 45 durometer rubber drum with 60 mm (2.36") wide "TES" air cushion pad platen with 2 removable inserts; 170 mm (6.69") max. part thickness; uses 43" X 75" abrasive belts; automatic feed belt tracking; 15 and 30 FPM feed speed with a 1 HP feed motor; 50 Durometer seamless feed mat with negative profile; adjustable automatic thickness setup device; motorized table height adjustment; (4) top and bottom fastened jack screws; Logic 50 K Electronic programmer for timing/anti-dubbing of the pad; electronic digital table height indicators; 2 roller infeed and outfeed roller table extensions. Electrical Requirements: 80 amps @ 230 volts 3-Phase; Dust Extraction: 1,800 CFM with (2) 140 mm (5.5") dust outlets; Air Requirements: 6 Bar (88 PSI).
SCMI SANDYA 5/S RCS WIDE BELT SANDER
2-head 43" wide capacity. 1st Head: 140mm (5.5") steel calibrating drum with 24 HP motor; 2nd Head: 18 HP combination head with 140mm (5.5") 45 shore spiral grooved rubber coated roller and 2" finishing platen. MAJOR FEATURES: Adjustable drum and pad positions with pneumatic on/off on both the roller and pad; grooved pressing rollers before and after all working units; 4 top/bottom fastened jack screws; electronic digital thickness readout for table height; motorized table height adjustment; automatic thickness setup device; 1 HP variable speed feed motor with electric adjustment 3.5 to 18 m/min (12 to 60 FPM); electronic belt tracking; 43" x 85" abrasive belt size; automatic feed belt tracking; 50 Durometer, seamless feed mat with negative profile; 2 roller infeed and outfeed roller table extensions; maximum material thickness – 6.69"; mimimum material length – 12.5"; Electrical: 120 amps @ 230 volts 3-Phase; Dust Extraction: 2,380 CFM with (2) 160mm (6.3") outlets. Weight: 3,200 lbs.
CEMCO 2237 PLANER/SANDER
Capacity: 37" wide X 6" thick; load space: 32"; equipped with anti kick-back fingers on in-feed. 1st head: helical planer head with carbide inserts - 30HP: 2nd head: grooved rubber contact drum - 20 HP; variable speed feed 1 HP; hand wheel adjustment for thickness with digital read-out; load meters for each head; pneumatic tracking on contact head; separate controls for each head; belt size: 37" X 75".
NEW SAFETY SPEED CUT WBS-4375 WIDE BELT SANDER
20 HP motor; 43" width capacity; combination head with 5-1/2" OD rubber covered contact roller with 1-5/8" drive bearings and 2-1/2" removable platen; 43" x 75" abrasive belt size; photo electric belt tracking; pneumatic belt tensioning; (2) 2-1/2" OD rubber covered pinch rollers; (2) 4-1/2" OD machined idler rollers with 1" bearings; conveyor table set on (4) 1" acme threaded jackscrews; 6" internal dust chute; emergency stop button; CFM requirement is 1,800 CFM. Includes Optional Proscale Digital Readout for bed opening.
TIMESAVERS 237-3 WIDE BELT SANDER
37" wide capacity; 3-head machine; 1st head: 9-1/2" diameter spiral grooved rubber contact roll - 30 HP; 2nd head: 9-1/2" diameter spiral grooved rubber contact roll - 30 HP; 3rd head: 2-1/2" wide polishing platen - 20HP; 37" X 75" abrasive belt size; 3 HP variable speed feed 15 to 45 FPM; electric eye tracking; motorized thickness adjustment; "Auto-Set" thickness set-up; combination holddown rollers and shoes; load meters.
TIMESAVERS 2331-04-334 ORBITAL SANDER
43" wide capacity; (2) 7" wide dual motion orbital heads, each powered by (1) 5 HP motor; (1) 10" dia. 180 grit abrasive brush; variable speed feed 5 to 30 FPM; vacuum bed; auto-set device; motorized raise and lower of table; digital thickness readout; double infeed and outfeed holddown rollers; 24" infeed loading area; 0 to 5" bed opening; hour meter; Star Delta starters.
TIMESAVERS 137-3HP75 WIDE BELT SANDER
37" wide capacity; 3-head machine; 1st head: 6" dia. 85/90 duro spiral grooved rubber contact roll - 30 HP; 2nd head: 6" dia. 75/80 duro spiral grooved rubber contact roll - 20 HP; 3rd head: combination head with 4" dia. 60/65 duro spiral grooved rubber contact roll and 1-1/2" wide finishing platen - 15 HP; 37" x 75" abrasive belt size; variable speed feed 15 to 45 FPM; thickness setup device; 8" max. thickness capacity; infeed and outfeed rubber holddown rollers; load meters; 8,136 hours on machine.
SCMI SANDYA 3/S CS 9 WIDE BELT SANDER
37" wide capacity; 6.69" max. workpiece thickness; min. workpiece length 12.5"; (1) combination head with 4.75" dia. 85 shore rubber drum and 2" wide finishing pad; 24 HP main sanding motor; 37" x 75" abrasive belt size; .7 HP 2-speed feed 15 & 30 FPM: automatic electronic table positioning device; electronic digital thickness readout of work table position; adjustable sanding drum and pad position for micro precision adjustment; rubber coated pressing rollers before and after working unit; 2 roller infeed and outfeed table extensions; load meter; (1) 5.5" dia. dust outlet (900 CFM required). Electrical: 68 amps @ 230 volt 3 phase Machine weight: 3,300 lbs.
NEW SCMI SANDYA 3/S KCS PLANER/SANDER
2-head 37" wide capacity planer/sander; 30 HP main motor with star/delta soft start. 1st Head: 120mm (4.75”) diameter knife Planer with 4-sided throwaway knives with pneumatic on/off (2mm max. removal); 2nd Head: Combination head with 120mm (4.75”) 65 shore grooved rubber finishing roller and finishing platen with pneumatic on/off; (2) 50mm (2") pad inserts for sanding platen. MAJOR FEATURES: Adjustable drum and pad positions with pneumatic on/off on both the roller and pad; 4 Top/bottom fastened jack screws; electronic digital thickness readout for table height; motorized table height adjustment; automatic thickness setup device; 1 HP variable speed feed motor with electric adjustment 3.5 to 18 m/min (12 to 60 FPM); electronic belt tracking; 37" x 75" abrasive belt size; automatic feed belt tracking; 50 Durometer, seamless feed mat with negative profile; 2 roller infeed and outfeed roll table extensions. Electrical: 80 amps @ 230 volts 3-Phase; Dust Extraction: 2,106 CFM with (1) 140mm (5.5”) outlet and (1) 160mm (6.3”) outlet.
NEW SCMI SANDYA 3/S KCS PLANER/SANDER
2-head 37" wide capacity planer/sander; 30 HP main motor with star/delta soft start. 1st Head: 120mm (4.75”) diameter knife Planer with 4-sided throwaway knives with pneumatic on/off (2mm max. removal); 2nd Head: Combination head with 120mm (4.75”) 65 shore grooved rubber finishing roller and finishing platen with pneumatic on/off; (2) 50mm (2") pad inserts for sanding platen. MAJOR FEATURES: Adjustable drum and pad positions with pneumatic on/off on both the roller and pad; 4 Top/bottom fastened jack screws; electronic digital thickness readout for table height; motorized table height adjustment; automatic thickness setup device; 1 HP variable speed feed motor with electric adjustment 3.5 to 18 m/min (12 to 60 FPM); electronic belt tracking; 37” x 75” abrasive belt size; automatic feed belt tracking; 50 Durometer, seamless feed mat with negative profile; 2 roller infeed and outfeed roll table extensions. Electrical: 80 amps @ 230 volts 3-Phase; Dust Extraction: 2,106 CFM with (1) 140mm (5.5”) outlet and (1) 160mm (6.3”) outlet.
NORTHTECH NT-KL-36RC WIDE BELT SANDER
36" wide capacity; 2-head machine. 1st head: Rubber covered contact drum - 20 HP; 2nd head: Combination head with a rubber covered contact drum and 2-1/4" wide finishing pad - 15 HP; 37" X 75" abrasive belt length; 2 HP variable speed feed 13 to 49 FPM; motorized thickness adjustment; DP-525 microcomputer allows exact table positioning with simple key pad entry; LED readout for thickness; infeed and outfeed rubber covered spring loaded holddown rolls; electric eye tracking. Machine weight: 3,690 lbs.
TIMESAVERS 252-3 WIDE BELT SANDER
52" wide capacity; 3-head machine; 1st head: 9-1/2" diameter 60 to 70 duro spiral grooved rubber contact roll - 40 HP; 2nd head: 9-1/2" diameter 60 to 70 duro spiral grooved rubber contact roll - 30 HP; 3rd head: 4" wide solid polishing platen - 30 HP; 52" x 75" abrasive belt size; variable speed feed 15 to 45 FPM; electric eye tracking; motorized thickness adjustment; "Auto-Set" thickness set-up; mechanical digital readout; load meters.
SAC EXECUTIVE K1300 WIDE BELT SANDER
Single head machine with 52" width capacity; 6.3" maximum working thickness; .12" minimum working thickness; 30 HP motor; combination head with 7-1/2" dia. 65 duro rubber covered contact roller and 2" wide adjustable pneumatic platen; 3 HP variable speed feed 10 to 60 FPM; 52" x 103" abrasive belt size; automatic thickness adjustment; LED readout for table positioning; motorized raise and lower of table; .5 HP table lifting motor; 15 point check panel; abrasive belt blow off device; front and rear spring loaded rubber sectioned hold down rollers; photo electric belt tracking with 3 sensors; pneumatic belt tensioning; load meter; magnetic starter with overload protection; 7" dia. dust outlet. Dust requirements: 2,550 CFM; Electrical requirements: 100 amps @ 220 volt; Air requirements: 6 Bar @ 90 PSI; Dims: 96" x 84" x 96"; Machine weight: 5,100 lbs.
