NEW SCMI OLIMPIC K 130E AUTOMATIC EDGEBANDER

PRIMARY SPECIFICATIONS: .4 mm to 3 mm edgebanding thickness capacity; 3 mm guillotine capacity; 3/8" min. to 1-15/16" panel thickness; minimum panel length is 5-1/2"; minimum panel width is 2-3/8"; minimum distance between panels is 22"; feed speed 30 FPM. MAJOR FEATURES: Orion 1 Controller with soft touch keypad; quick change/disconnect glue pot; 3-roller pressure section with automatic strip magazine; (2) .50 HP motors for end trim unit on THK guides with pneumatic tilt; (2) .7 HP top and bottom trim motors with 15° conical cutter and straight insert cutter; top and bottom copy wheels; scrape station with collection bin; buffing unit with (2) .25 HP motors that can be tilted up to 12°; mechanical digital readout for height of the pressure beam; adjustable side support; digital inverter for electronic motor braking; acoustical safety enclosure. Air Requirements: 90 psi

NEW SCMI OLIMPIC K 500 T EDGEBANDER

PRIMARY SPECIFICATIONS: .4mm to 8mm (.016 to 5/16") edgebanding thickness; guillotine capacity 3 mm; 2-speed feed speed 36 and 52 FPM; panel thickness 3/8" min. to 2-1/8" max.; minimum panel length 5-1/2"; minimum panel width 2-3/8"; minimum distance between panels 20". MAJOR FEATURES: Orion 200 Color Graphic Controller; quick change/disconnect glue pot; pressure section with (1) powered and pneumatic pressure roller and (2) pneumatically loaded idle pressure rollers; automatic strip magazine; adjustable infeed fence with pneumatic positioning; "RT-E" pre-milling station with (2) 2.5 HP high frequency motors and 100 mm diamond premill cutters, pre-mill station equipped with copying device; 2-motor tiltable (0 to 15°) .50 HP end trim motors on THK guides with pneumatic tilt; (2) .7 HP top and bottom trim motors capable of tilting 0 to 25° with top and bottom copy wheels and mechanical digital readouts for positioning; (2) .75 HP motors for corner rounding capable of going from 3 mm PVC to thin tape via controller; scrape station with pneumatic in/out positioning from the control panel; buffing unit with (2) .25 HP motors that can be tilted up to 12°, with hot air blower to brighten the edges of thick PVC; replaceable track pads; top pressure beam standard with staggered rollers equipped with steel ball bearings; inverter for electronic motor braking; control panel located at machine infeed; acoustical safety enclosure.

NEW SCMI OLIMPIC K 130E EDGEBANDER

PRIMARY SPECIFICATIONS: .4 mm to 3 mm edgebanding thickness capacity; 3 mm guillotine capacity; 3/8" min. to 1-15/16" panel thickness; minimum panel length is 5-1/2"; minimum panel width is 2-3/8"; minimum distance between panels is 22"; feed speed 30 FPM. MAJOR FEATURES: Orion 1 Controller with soft touch keypad; quick change/disconnect glue pot; 3-roller pressure section with automatic strip magazine; (2) .50 HP motors for end trim unit on THK guides with pneumatic tilt; (2) .7 HP top and bottom trim motors with 15° conical cutter and straight insert cutter; top and bottom copy wheels; scrape station with collection bin; buffing unit with (2) .25 HP motors that can be tilted up to 12°; mechanical digital readout for height of the pressure beam; adjustable side support; digital inverter for electronic motor braking; acoustical safety enclosure. Air Requirements: 90 psi

VITAP ROUNDER CORNER ROUNDING MACHINE

Machine is in new condition, never used. For corner rounding, soft form, and post form trimming; (1) pneumatic 12,000 RPM motor; 16 to 60 mm trim height; 3 mm maximum tape thickness; 60 mm minimum panel width; 20 - 30 mm maximum profile depth; 780 mm x 620 mm overall dimensions. Includes trimming tool for 3 mm and straight. Requires 21 CFM of air. Machine weight - 302 lbs.

CEHISA 207 EDGEBANDER

3/8" edgebanding thickness capacity; panel thickness 3/8" min. to 2" max.; automatic guillotine for cutting up to 4mm PVC from the coil; automatic strip feed magazine; hot melt glue pot; pressure station with (1) motorized pressure roller plus (2) additional idle pressure rollers; (2) 1/3 HP end trim units; 3/4 HP top and bottom tiltable trims; 4-motor corner rounding with .40HP motors; top and bottom scraping; 3/4 HP top and bottom buffing; 3-1/2 HP variable speed feed, up to 41 FPM; digital readouts on all stations except buffing; sound/safety enclosure.

NEW CEHISA PRO-7 EDGEBANDER

3 mm capacity edgeband thickness; 5" min. panel length; 3" min. panel width; 3/8" min. panel thickness; 2" max. panel thickness; 1 HP feed motor with speed of 33 FPM; (1) motorized pressure roller with (1) additional pressure roller; 1/3 HP double blade end trim unit with a tooling speed of 12,000 RPM; 1/3 HP top and bottom trim station with (2) digitals per unit and combination flush/radius carbide tooling; automatic roll cutter and strip feed magazine; quick changeover for rolls or strip material; guillotine for cutting up to 3 mm PVC from the coil; quickmelt glue pot with quick change disconnect for ease of maintenance or glue color change if required; 10 to 15 min. heat up time, depending upon voltage; digital thermostat with approaching temperature control (PDI) and auto temperature drop. Machine weight - 1,455 lbs. Requires 17 amp service at 220V 3-Phase. Machine Length 7'6".

NEW SAFETY SPEED CUT EZ 72GP GLUE POT EDGEBANDER

This glue pot edgebander features a micro adjust tape guide for quick tape changes, electromagnetic end cutters, and the Accutrim edge trim system; uses polyester, PVC, wood or single laminate strips; tape widths of 1/2" (13mm) to 1-3/4" (45mm); Digital P.I.D. temperature control; standby temperature mode; automatic timed temperature reduction; anodized glue pot interior for ease of cleaning; built in safety control; 10 to 15 minute glue heat up time; sealed ball bearing rotary movement; dust collection outlet; automatic conveyor for consistent feed rate with a max. feed rate of 24 FPM. Dimensions: 72"L � 48"H � 37"D; Machine weight 400 lbs. American Made.

CEHISA EP-9 EDGEBANDER

3/16" Maximum edgebanding thickness capacity; 2" maximum panel thickness; automatic guillotine for cutting up to 4 mm PVC from the coil; automatic strip feed magazine; quickmelt glue pot with quick change disconnect for ease of maintenance or glue color change if required; pressure station with (1) motorized pressure roller plus (2) additional pressure rollers; 1/3 HP end trim station; 3/4 HP top and bottom tiltable trim equipped with digital readouts and insert tooling (for flush and bevel trimming); radius scraping station; top & bottom buffing; 1.2 HP single speed feed - 33 FPM; digital readout on top pressure beam for height indication; digital readouts on pressure station. Machine weight - 2,100 lbs.; Machine length - 11'.

BIESSE SINGLE 89 CONTOUR BANDER

Used for edgebanding straight, round, and irregular shaped panels; banding material thickness capacity is .4 mm min. to 3 mm max. with roll stock and 5 mm max. with strips; max. edgebanding height � 124mm; working thickness of panel � 10 to 120 mm; min. edgebanding radius is 3/4"; min. panel length is 11"; two sided hot melt glue pot (can apply glue to panel or edgebanding material) with 11 lb. capacity; electronic digital readout for tape length; glue temperature control; guillotine for roll stock up to 3 mm; work table will tilt 0° to 45° to band beveled edges; outboard support with 360 degree rollers for straight or shaped panels; side pressure bar; additional hot air blower; feed speed variable 6.7 to 60 FPM; foot pedal with time delay; machine weight - 774 lbs.

NEW GRIGGIO GB 2/8 AUTOMATIC EDGEBANDER

0.4 - 8 mm max. edgeband thickness capacity; 0.4" to 2.4" max. panel thickness; automatic edge strip loader; 4 liter capacity non-stick glue pot with quick heating and auto temperature drop when not operating; edge pressure unit complete with 3 rollers: (1) motorized pressure roller and (2) idle pressure rollers; (2) end trim stations tiltable 0° to 15°; top and bottom trim station tiltable 0° to 45°; feed motor with a two speed feed of 39 ft/min and 52 ft/min; carbide insert tooling 3 mm and straight for surface trimmers; digital readout on top pressure beam for height indication, digital readout on edge pressure station with pneumatic pressure; digital readouts on top and bottom trim station. Power requirements: 28 amps @ 230V Dust collection requirements: 750 CFM Air consumption: 14 CFM @ 90 PSI Machine weight: 2,380 lbs.

NEW GRIGGIO GB 2/8 AUTOMATIC EDGEBANDER

0.4 - 8 mm max. edgeband thickness capacity; 0.4" to 2.4" max. panel thickness; automatic edge strip loader; 4 liter capacity non-stick glue pot with quick heating and auto temperature drop when not operating; edge pressure unit complete with 3 rollers: (1) motorized pressure roller and (2) idle pressure rollers; (2) end trim stations tiltable 0° to 15°; top and bottom trim station tiltable 0° to 45°; feed motor with a two speed feed of 39 ft/min and 52 ft/min; carbide insert tooling 3 mm and straight for surface trimmers; digital readout on top pressure beam for height indication, digital readout on edge pressure station with pneumatic pressure; digital readouts on top and bottom trim station. Power requirements: 28 amps @ 230V Dust collection requirements: 750 CFM Air consumption: 14 CFM @ 90 PSI Machine weight: 2,380 lbs.

NEW GRIGGIO GB 4/8 AUTOMATIC EDGEBANDER

0.4 - 8 mm max. edgeband thickness capacity; 0.4" to 2.4" max. panel thickness; automatic edge strip loader; 4 liter capacity non-stick glue pot with quick heating and auto temperature drop when not operating; edge pressure unit with: (1) motorized pressure roller and (2) idle pressure rollers; (2) end trim stations tiltable 0° to 15°; top and bottom trim station tiltable 0° to 45°; scraping station; buffing station; feed motor with a fixed feed speed of 39 FPM; carbide insert tooling 3 mm and straight for surface trimmers; digital readout on top pressure beam for height indication, digital readout on edge pressure station with pneumatic pressure; digital readouts on top and bottom trim station and scrape station. Power requirements: 35 AMPS @ 230V Dust collection requirements: 950 CFM Air consumption: 14 CFM @ 90 PSI Machine weight: 2,930 lbs.

NEW GRIGGIO GB 4/8 AUTOMATIC EDGEBANDER

0.4 - 8 mm max. edgeband thickness capacity; 0.4" to 2.4" max. panel thickness; automatic edge strip loader; 4 liter capacity non-stick glue pot with quick heating and auto temperature drop when not operating; edge pressure unit with: (1) motorized pressure roller and (2) idle pressure rollers; (2) end trim stations tiltable 0° to 15°; top and bottom trim station tiltable 0° to 45°; scraping station; buffing station; feed motor with a fixed feed speed of 39 FPM; carbide insert tooling 3 mm and straight for surface trimmers; digital readout on top pressure beam for height indication, digital readout on edge pressure station with pneumatic pressure; digital readouts on top and bottom trim station and scrape station. Power requirements: 35 AMPS @ 230V Dust collection requirements: 950 CFM Air consumption: 14 CFM @ 90 PSI Machine weight: 2,930 lbs.

NEW GRIGGIO GB 60/10 CONTOUR EDGEBANDER

Used for edgebanding straight and curved parts; hot melt glue pot with applicator; feeds coil stock and strips; table switch for edgebanding of straight parts and foot switch for curved parts; glue temperature control on front panel; tape length has dual controls by timer and length; workpiece thickness 7/16" to 2-3/8"; banding material height from 1/2" to 2-7/16"; min. length workpiece 11-7/8"; edgeband material thickness from 0.4 mm to 3 mm; feed speeds of 7, 12 and 17 m/min. Power Requirements: 18 amps @ 230V 3-Ph Compressed Air Requirements: 90 PSI @ 3 CFM Dimensions: 47-1/4" w x 31-1/2" d x 43-1/2" h

VIRUTEX EB-25 EDGEBANDER

Hot air machine (uses pre-glued banding material); 1 mm maximum edgeband thickness; 7/16" minimum to 2" maximum workpiece thickness; power feed belt with feed speed of 15 FPM; top and bottom flush trim; front and back end trim; electronic control panel for heat control, feeder, and emergency switch. Dimensions: 67" x 37" x 53"; Weight: 260 lbs. No compressed air or dust collection required.

NEW SCMI OLIMPIC K 300 ( SINGLE SIDED EDGEBANDER

PRIMARY SPECIFICATIONS: .4 mm to 3 mm (.016 to 1/8") edgebanding thickness; guillotine capacity 3 mm; feed speed 33 FPM; panel thickness 3/8" min to 1-15/16" max.; min. panel length 5-1/2"; min. panel width 2-3/8"; min. distance between panels 22". MAJOR FEATURES: Orion 100 Color Graphic Controller; quick change/disconnect glue pot; pressure station with pneumatic driven roller and spring loaded idle roller; strip feed magazine; mechanical digital readout for positioning of pressure section; end trim station with .50 HP motor and a double blade cutting system, pneumatically positioned through the controller; (2) .7 HP top and bottom trim motors capable of tilting 0 to 25° with copy wheels, 2-position pneumatics to go from 3mm pvc to thin tape through the controller; .50 HP single motor corner rounding unit, can go from 3mm PVC to thin tape through the controller, comes equipped with a diamond cutterhead; scrape station for 3mm PVC with pneumatic positioning; 2-motor tiltable buffing unit; adjustable side support; replaceable track pads; digital inverter for electronic motor braking; acoustical safety enclosure.

VITAP QUARTZ HOT AIR EDGEBANDER

Uses pre-glued tapes only; panel thickness is 11 to 35 mm; top and bottom trim units with copiers; (2) end trim units; automatic panel feed at speed of 4 meters per minute; electronic temperature setting; maximum temperature setting is 650°; tape thickness is 0.1 to 1.2 mm; digital indicator for adjusting for panel thickness; 3 kW blower.

CEHISA EP-9S EDGEBANDER

3/16" max. edgebanding thickness capacity; 2" max. panel thickness; automatic guillotine for cutting up to 4 mm PVC from the coil; automatic strip feed magazine; quickmelt glue pot with quick change disconnect for ease of maintenance or glue color change if required; pressure station with (1) motorized pressure roller plus (2) additional pressure rollers; swivel control panel with LCD screen; pneumatic positioning executed from the LCD screen for the following: Pressure station, top and bottom trim station, and scraping station; 1/3 HP end trim station; 3/4 HP top and bottom tiltable trim equipped with digital readouts and insert tooling (for flush and bevel trimming); radius scraping station; top & bottom buffing; 1.2 HP single speed feed - 33 FPM; digital readout on top pressure beam for height indication; digital readouts on pressure station. Machine weight: 2,100 lbs.; Machine length: 11'.

By Stock Number

By Category

By Manufacturer

New Machinery

J&G Lines

Can't Find It?

Category : Edgebanders

NEW SCMI OLIMPIC K 130E AUTOMATIC EDGEBANDER

NEW SCMI OLIMPIC K 500 T EDGEBANDER

NEW SCMI OLIMPIC K 130E EDGEBANDER

VITAP ROUNDER CORNER ROUNDING MACHINE

CEHISA 207 EDGEBANDER

NEW CEHISA PRO-7 EDGEBANDER

NEW SAFETY SPEED CUT EZ 72GP GLUE POT EDGEBANDER

CEHISA EP-9 EDGEBANDER

BIESSE SINGLE 89 CONTOUR BANDER

NEW GRIGGIO GB 2/8 AUTOMATIC EDGEBANDER

NEW GRIGGIO GB 2/8 AUTOMATIC EDGEBANDER

NEW GRIGGIO GB 4/8 AUTOMATIC EDGEBANDER

NEW GRIGGIO GB 4/8 AUTOMATIC EDGEBANDER

NEW GRIGGIO GB 60/10 CONTOUR EDGEBANDER

VIRUTEX EB-25 EDGEBANDER

NEW SCMI OLIMPIC K 300 ( SINGLE SIDED EDGEBANDER

VITAP QUARTZ HOT AIR EDGEBANDER

CEHISA EP-9S EDGEBANDER