Description

• PLC Control system with LED display and keypad
• Workpiece is fed by chain
• Edge coil support plate
• Edge feeding is automatic with a thickness capacity of 0.4 to 3 mm
• Strip material can be hand fed
• Coil edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears
• Teflon coated hot-melt glue pot
• Spring loaded pressure unit with (2) pressure rollers
• 8,800 RPM end trimming unit
• 10,500 RPM top and bottom trimmers with insert knife cutters for radius trimming and bevel trimming
• Radius scraper with 2 mm radius
• Top and bottom buffing units
• Heavy duty pressure beam with extendable workpiece support
• Heated infeed fence for pre-heating the panel from optimum glue penetration

• Feed speed: 23 FPM
• 0.472" (12 mm) to 1.77" (45 mm) Panel thickness capacity
• 0.4 to 3 mm edgebanding thickness capacity
• Minimum panel width: 4.75"
• Minimum panel length: 6.69"
• Total connected power: 5 HP
• Machine dimensions: 115" x 47" x 48"
• Machine weight: 968 Lbs.
• 30 Amps at 230 V SINGLE PHASE

Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.