Description

• PLC Control system with LED display and keypad
• Workpiece is fed by chain
• Edge coil support plate
• Edge feeding is automatic with a thickness capacity of 0.4 to 3 mm; Strip material can be hand fed
• Coil edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears
• Teflon coated hot-melt glue pot
• Spring loaded pressure unit with (2) pressure rollers
• High Frequency, 12000 RPM end trimming unit
• High Frequency, 12000 RPM top and bottom trimmers with insert knife cutters for radius trimming and bevel trimming
• Radius scraper with 2 mm radius
• 3000 RPM top and bottom buffing units
• Heavy duty pressure beam with extendable workpiece support
• Heated infeed fence for pre-heating the panel from optimum glue penetration

• Feed speed: 29.5 FPM
• 0.315" to 1.77" Panel thickness capacity
• 0.4 to 3 mm edgebanding thickness capacity
• Minimum panel width: 4"
• Minimum panel length: 6.69"
• Total connected power: 7.4 HP
• Machine dimensions: 116" x 44" x 55"
• Machine weight: 1,144 Lbs.
• 37 Amps at 230 V SINGLE PHASE

Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.