J & G Machinery
  1. cart [ empty ]
  2. Contact Us
  3. Sell to J & G
  4. home
  1. about
  2. categories
  3. brands
  4. service
  5. parts & tooling

VITAP ECLIPSE CONTOUR EDGEBANDER

  • stock number
    ECLIPSE
  • new/used
    New
  • year
  • fob
    Sanford, NC
  • electrical
    230 V, 3 Ph, 60 Cy
  • condition
    NEW
  • qty
    1

Share:

Have questions?
Prefer to discuss
by phone or email?
We're here to help!

P: 919-776-8341
sales@jgmachinery.com

  • VITAP ECLIPSE CONTOUR EDGEBANDER

Description

  • Edgebands shaped concave, convex and straight panels 10 to 60 mm thickness
  • Efficient design using latest engineering and manufacturing techniques
  • Heavy duty frame construction
  • Large heavy duty movable vacuum pod arm for ease of operation (Maximum panel weight is 175 lbs.)
  • State-of-the-art electronic control system and High Frequency motors
  • Laser measurement to help insure constant tight splice-joints on closed panels
  • Designed to apply hot melt EVA Adhesive and edgebanding (Note: 0.5 to 3 mm edgeband thickness)
  • Trimming unit will facilitate trimming of the top and bottom overhang of the edgebanding
 
Machine Specifications:
  • Glue and tape application on big and small shaped panels
  • Equipped with glue pot with 1 Kg capacity
  • INCLUDES glue storage hopper for larger adhesive volume with timed sequence selection for replenishing reservoir
  • (2) Rollers to copy the shape of the piece
  • Glue application amount is adjusted via a knob
  • Automatic guillotine for coiled material up to 3 mm x 45 mm
  • PLC to set the length and the cut of the tape (by means of an encoder) for open and closed pieces.
  • Laser for easy programming of the cut for closed pieces with no need of measuring the piece
  • On/Off automatic feeder of the panel
  • Raisable working table for small panels
  • Utilizes (2) 800 Watt heating elements with electronic temperature control via thermo-regulator
  • Trimming station with pneumatic tilting, to allow edgebanding of big pieces
  • Trimming unit with (2) 0.5 Kw 15000 RPM high frequency motors with up/down and front copiers and pneumatic cylinder to lift the motors approaching the pieces to be trimmed
  • Front copier external adjustment of the trimming unit
  • (2) Brazed cutters
  • Raisable working table for small panels
  • Reinforced arm with vacuum table to hold large panels  
 
Technical Data:
  • Edge Coil Thickness: 0.5 mm - 3 mm (0.5 or thicker thin tape ONLY with proper Low Temp Adhesive)
  • Work piece min: 200 mm dia.
  • Work piece max: 2400 mm dia.
  • Work piece Thickness: 10 - 60 mm (Note: Max. is 45 mm with 3 mm edgebanding - Min. 12 mm for trim station clearance.)
  • Edgeband Thickness: 0.5 mm /.020 to 1 mm for panels up to 60mm thick, 2 mm for panels up to 60 mm thick, 3 mm for panels up to 45 mm thick
  • Minimum Outside Radius 30 mm (note: based on quality / type of edge tape)
  • Minimum Inside Radius 250 mm
  • Feed (Rotation) Speed: 5 m/min
  • Dust extraction port: 1 port at 80mm for Trimming unit
  • Air Requirement: 6 bar (90 psi)
  • Machine Dimensions:  2100 mm x 1600 mm x 1600 mm

Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.

Member WMIA UWME Member

Connect with us

J & G Machinery on Facebook J & G Machinery on Twitter J & G Machinery on YouTube

© Copyright 2008–2017 J&G Machinery, Inc. All Rights Reserved
Terms and Conditions