LEADERMAC 518S MOULDER
- stock number
230 V, 3 Ph, 60 Cy
Prefer to discuss
by phone or email?
We're here to help!
- 5-Head moulder
- 5" x 7" Wide capacity
- Minimum length of material - 8" (butt fed)
- Axial adjustment side heads - 0.8"
- Axial adjustment top/bottom heads - 0.8"
- Feed speeds of 20 to 85 FPM (4 HP feed motor)
- 1st head: 7.5 HP bottom
- 2nd & 3rd head: 15 HP right & left side
- 4th head: 15 HP top
- 5th head: 10 HP bottom
- All spindles are 40mm and standard 6000 RPM
- All spindles have horizontal and vertical adjustment from the front of the machine
- Serrated steel feed rollers before top horizontal head
- Rubber coated feed rollers after top horizontal head
- (2) Full width driven bottom infeed roller
- Powered raise and lower of feed support beam
- All top rolls are pneumatically tensioned
- Edge reference straightening system
- All tables, bedplates, chipbreakers, pressure plates, and fences are hardened chrome for better wear resistance
- Hand pump bed lubrication system
- Machine weight: 8,200 Lbs.
- Electronic DC Brakes (US manufactured) for the Cutterhead Spindle Assemblies including small steel enclosure that can be mounted separately or can be mounted on top of the main electrical enclosure.
- LMC MOU200600X29 Cutterhead Setting Stand for measuring radial diameter before and after grinding, to determine change in radial diameter. The dimensions obtained can be used to set the dual mechanical digital readout on the moulder.
Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.