Description

• .4 mm to 12 mm edgebanding thickness
• Guillotine capacity 3 mm
• Feed speed 40 and 60 FPM
• Panel thickness 3/8" min to 2-3/8" max.
• Min. panel length 5-1/2"
• Min. panel width 2"
• Min. distance between panels 24"

• "Startouch" Electronic Controller
• Infeed fence with mechanical digital indicator with pneumatic panel spacing device to prevent the operator from feeding the panels to close to one another
• Anti-adhesive unit prior to pre milling unit to prevent the buildup of glue on the top and bottom of the panel
• "QMS" Quick melt glue system with SGP glue pot
• Servo drive pressure section 1 driven roller and 3 idle rollers
• Strip feed magazine
• Electronic positioning of top pressure beam
• Anti-adhesive unit positioned prior to the pre milling unit prevents the build up of glue on the top and bottom of the panel
• "RT-E" 3 HP ea.pre-Milling station to rectify/clean panels already sized
• "K-SEL 2" end trim station with (2) independent .50 HP motors mounted on THK guides
• (2) 1 HP 12,000 rpm top and bottom flush trim motors with 2 position pneumatics and is capable of cutting flush or leaving an overhang
• (2) 1 HP 12,000 rpm top and bottom trimming motors, with servo control to go from one material thickness to another through controller
• "Round-K" corner rounding unit with (2) .80 HP independent motors that slide on THK guides, unit can go from thin tape to 3 mm PVC through the controller
• "RAS" profile scrape station for 3 mm PVC with pneumatic in/out  positioning through the controller
• "RC-V" Glue scraping station
• (2) .25 HP motor tiltable buffing units;
• Hot air blower to brighten the edges of thick PVC
• Digital inverter for electronic motor braking
• Acoustical safety enclosure
• Air Requirements: 90 PSI
• Dust Collection: Working units are individually ported on the top of the safety enclosure for maximum efficiency

Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.