CANTEK GT-635ARD TOP & BOTTOM PLANER
- stock number
460V, 3 Ph, 60 Cy
Prefer to discuss
by phone or email?
We're here to help!
- Heavy duty cast iron machine body and table for vibration free running
- Cutterheads are spiral insert type with six (6) rows of carbide inserts. These cutterheads produce an excellent finish, run much quieter than conventional straight knife heads, and require less HP to perform the planing operation.
- The inserts are an industry standard item, and have two (2) cutting edges.
- The conveyor feed system uses a spring loaded pin arrangement to pass material over the bottom jointing head.
- A driven rubber top roll, after the top head, delivers the material out of the machine.
- Variable feed speed by frequency inverter
- Infeed bed roller is idle
- (3) Bottom full width bed rolls (2 driven and 1 idle) also included – really improves feeding of difficult materials
- Digital electronic thickness adjustment in INCH and MM. Inch is to 3 deicimal places
- Opening of the machine is motorized, and driven by a 1/2 HP TEFC motor
- Swiveling control panel for more ergonomic access to machine controls (Not shown)
- Easy to access external handwheel adjustment of infeed bed
- The table surface is hard chrome plated and precision ground for smooth performance and maximum wear resistance at high speeds
- A hand lubricator is provided for convenient lubrication to the table slideways and an auto lubricator provides lubrication to the caterpillar feed chain
- Chipbreaker and top feed roller into top head is sectional
- Rubber outfeed top roller to prevent chip marking
- Over thickness safety shut-off bar across infeed.
- Amp meter for each motor on control panel to monitor motor load
- Side covers to protect operator around bottom head
- Star Delta soft start
- Isolator switch to shut off power to control panel for added safety.
- Maximum working Width: 25"
- Maximum working Thickness: 8"
- Minimum workpiece length: 12.2"
- Minimum working thickness: 0.315" (10mm)
- Bottom jointing head motor: 20 HP TEFC
- Top planing head motor: 25 HP TEFC
- Feed motor: 5 HP
- Table elevation motor: 1/2 HP
- Cutterhead diameter: 4"
- Knife information: 30mm x 12mm x 1.5mm (90 per head - 180 pcs. total)
- Cutterhead speed: 5400 RPM
- Feed speed (variable): 23 to 65 FPM
- Dust collection: (2) 6" diameter
- Table size: 27" x 103" x 32" high
- Machine dimensions (LxWxH): 105" x 45.1" x 67.7"
- Net weight: 6600 lbs.
- Electrics: 460/3/60 (69.7 Full Load Amps)
Excellent Condition - Barely Used!
Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.