J & G Machinery
  1. cart [ empty ]
  2. Contact Us
  3. Sell to J & G
  4. home
  1. about
  2. categories
  3. brands
  4. service
  5. parts & tooling
  6. quick ship list

SCM TOPSET XL MOULDER

  • stock number
    12038
  • new/used
    Used
  • year
    2003
  • fob
    Sanford, NC
  • electrical
    460 V, 3 Ph, 60 Cy
  • condition
    CLEANED/CHECKED

Share:

  • OUR PRICE

    $37,500

Have questions?
Prefer to discuss
by phone or email?
We're here to help!

P: 919-776-8341
sales@jgmachinery.com

Description

  • 6-head moulder
  • 4.72" x 9.05" capacity (finished section)
  • Head configuration: Bottom 12 HP, Right 9 HP, Left 9 HP, Top 17 HP, Top 17 HP, Bottom 12 HP
  • All spindles are 1-13/16" diameter and 6,000 RPM
  • Pneumatic pressure on all feed wheels
  • 78" infeed straightening bed
  • 6 HP variable speed feed from 20 to 118 FPM
  • Mechanical digital readouts for vertical and horizontal adjustment of all spindles except 1st bottom head
  • Powered top beam and top head with simultaneous or independent adjustment - enabling easy rapid set up
  • "Set Up" rapid setting system on top and left vertical heads to accommodate different tool diameters
  • Minimum tooling diameter on spindles 2 thru 6: 100 mm
  • Maximum tooling diameter on spindles 2 thru 6: 220 mm
  • Minimum/maximum tooling diameter on spindle 1: 120 mm to 140 mm
  • Pneumatically loaded receding chip breakers for both top heads
  • 2-sector pressure shoe placed after second top horizontal spindle
  • (2) powered feed rollers on the work table
  • Pneumatic exclusion from control panel of powered feed wheel unit placed before first bottom head
  • Left horizontal presser placed before first bottom head with pneumatic exclusion from main control panel
  • Manual centralized lubrication on rear panel of machine
  • Manual lubrication pump for worktable
  • Remote hand held walk around control for ease of setting with feed jog, thickness setting, emergency stop and approx. 15' of cable
  • Pneumatic raise and lower of cabinet hood via switch at main control panel
  • Electro mechanical motor brakes for all spindles
  • Lighted safety enclosure
  • Power requirements: 120 amps @ 460 volt
  • Dust extraction requirements:  6,000 CFM @ 5,000 FPM
  • Machine weight: 11,000 lbs.

Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.

Member WMIA UWME Member

Connect with us

J & G Machinery on Facebook J & G Machinery on Twitter J & G Machinery on YouTube

© Copyright 2008–2019 J&G Machinery, Inc. All Rights Reserved
Terms and Conditions