KENTWOOD M507EL MOULDER
- stock number
460 V, 3 Ph, 60 Cy
Prefer to discuss
by phone or email?
We're here to help!
- 5-Head moulder
- 5" x 7" Wide capacity
- Minimum length of material: 10.2" (Butt fed)
- Feed speeds of 20 to 78 FPM (4 HP feed motor)
- 1st head: 7.5 HP bottom
- 2nd & 3rd head: 10 HP right & left side
- 4th head: 10 HP top
- 5th head: 10 HP bottom
- All spindles are 1-1/2" and standard 6000 RPM
- All spindles have horizontal and vertical adjustment from the front of the machine
- Axial adjustment side heads: 1.57"
- Axial adjustment top/bottom heads: 0.787"
- Serrated steel feed rollers before top horizontal head
- Rubber coated feed rollers after top horizontal head
- Full width driven bottom infeed roller
- 1 HP Powered raise and lower of feed support beam
- All top rolls are pneumatically tensioned
- Edge reference straightening system
- Chrome table plates
- Hand pump bed lubrication system
- Electro-mechanical spindle brakes
- Electrical requirements: 74 amps on 460 Volt
- Floorspace: 72" W x 154" L x 71" T
- Machine weight: 7,273 Lbs.
Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.