J & G Machinery
  1. cart [ empty ]
  2. Contact Us
  3. Sell to J & G
  4. home
  1. about
  2. categories
  3. brands
  4. service
  5. parts & tooling

WEEKE ABD 060/12/NA CNC BORE, GLUE & DOWEL INSERTER

  • stock number
    11860
  • new/used
    Used
  • year
    2014
  • fob
    Sanford, NC
  • electrical
    208-230/460 V, 3 Ph, 60 Cy
  • condition
    CLEANED/CHECKED

Share:

  • Replacement
    Cost

    ~$55,000
  • OUR PRICE

    Inquire

Have questions?
Prefer to discuss
by phone or email?
We're here to help!

P: 919-776-8341
sales@jgmachinery.com

Description

  • CNC controlled drill and dowel inserting machine
  • Can process up to 4 parts per set up by utilizing right, right center, left center, and left positioning or the center stop can be retracted for working large panels
  • 4 workpiece clamps activated by foot pedal hold piece at each station
  • Configured for use of pre-glued dowels (connect directly to water supply - not tanks)
  • Pneumatic control of center stop as well as left and right fences
  • Open end table design, allows for machining of parts longer than 48" on limited basis
  • CNC positioning of the X, Y, and Z axes
  • Oversized digital AC servo motors
  • Maximum panel length: 49.2"
  • Minimum panel length: .79"
  • Maximum panel width: 31.5"
  • Minimum panel width: 1.97"
  • Maximum panel thickness: 2.36"
  • Minimum panel thickness: .39"
  • Maximum panel length for active center stop: 23.5"
  • Horizontal drilling aggregated with (3) individually selectable spindles
  • (1) dowel injector (32 mm distance from drilling spindle)
  • Glue injector (currently water) with adjustable glue/water amount
  • Dowel size: 8 x 30 or 8 x 35 mm
  • Vibrating hopper for automatic dowel feeding
  • Low pressure pump for water/glue
  • Microsoft Windows based control with WoodWop programming
  • Large 17" display
  • Machine software bundle (preloaded on machine): WoodWop, ABDWork, Tool Data Base, Production List Software, Schuler MDE Basic
  • Includes: Manuals, CD, as well as PDF versions stored on machine containing operations and maintenance instructions
  • Drill shank diameter: 10 mm
  • Total length of drill bit: 70 mm
  • Amperage (nominal): 16/8 Amps @ 208/480 Volt
  • Note: Voltage supplied must not fluctuate in excess of +/- 5% of its stated value
  • Multi-tap transformer for 208/230/460/480 volt operation
  • Compressed air requirements: 102 psi (7 Bar)
  • Dust extraction outlet: 80 mm
  • Machine dimensions: 101"L x 50.6"W x 75.6"T
  • Machine weight: 2,645 lbs.

Comments:

Excellent Condition - Barely Used!

Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.

Member WMIA UWME Member

Connect with us

J & G Machinery on Facebook J & G Machinery on Twitter J & G Machinery on YouTube

© Copyright 2008–2018 J&G Machinery, Inc. All Rights Reserved
Terms and Conditions